KISHO Glass Coating

Kisho Premium Glass Coating

Designation of product: Kisho premium glass coating kit
Content:

1. 1 Si-701 glass coating agent (30ml);
2. 1 Si-901 glass coating agent (30ml);
3. 1 X-03 protectant (30ml); 
4. 2 Glass coating sponges; 
5. 1 Manual. 
kisho premium glass coating
Product features:
Si-701 and Si-901 double film glass coating overlay, protects vehicle finish with excellent and extended durability, consolidating top-level 3D glass coating film, which is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. 
kisho premium glass coating
Instructions: 
Pre-practice treatment 
Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary. 

kisho premium glass coating
Precautions before the practice 
1. This product is fast try, please avoid practice under burning sun, otherwise wiping would be impeded; 
2. Avoid practice in temperature environment under 10℃;
3. Please carry out practice under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate leading to wiping obstruction; 
4. Please completely clear fouling attached on vehicle body and carry out degreasing before practice; 
5. Please read practice manual in details and follow practice procedures therein. 
premium glass coating
Si-701 glass coating agent practice method 
1. Drip Si-701 glass coating agent to coating sponge for 7-10 drops, first swear it laterally, then swear it vertically with "#" pattern, recommended at 50cm*50cm for each practice area, and note the usage quantity, since excessive usage per time may lead to non-uniform smearing or wiping obstruction; 
2. Postpone for 2-8 minutes after smearing, then use a dry towel to clear surface residue whilst wiping the glass coating film with polishing brightness. Wiping duration recommendation: 30℃=within 3 min, 20℃=within 5 min, 10℃=within 8 min, glass coating hardening rate is directly correlated with temperature and humidity, thus it is recommended to measure local temperature and humidity before determining the wiping duration; 
3. Check wiping omission for each part under completion, until the whole vehicle is covered. 
premium glass coating
Si-901 glass coating agent practice method 
1. After completion of whole vehicle Si-701 glass coating practice, postpone for above 1-2 hours to carry out Si-901 practice, enabling enhanced effective given by an initial hardening process of Si-701 coating film; 

2. Before smearing glass coating, spray a thin layer of moisture on the glass coating area evenly (upon smearing moisture does not drop being benchmark); 

3. Drip Si-901 glass coating agent to glass coating sponge for 4-6 drops, first swear it laterally, then swear it vertically with "#" pattern, recommended at 50cm*50cm for each practice area; 

4. Wait 1-6 minutes to wipe after smearing, first use a wet towel to wipe with even strength (no need to wipe repeatedly, just spread the glass coating agent), then immediately use a dry towel to wipe the glass coating layer, until the surface is bright and smooth. Wiping duration recommendation: 30℃=within 2 min, 20℃=within 4 min, 10℃=within 6 min, glass coating hardening rate is directly correlated with temperature and humidity, thus it is recommended to measure local temperature and humidity before determining the wiping duration; 

5. Check wiping omission for each part under completion, until the whole vehicle is covered. 
premium glass coating
X-03 protectant practice method 

After completion of whole vehicle Si-901 glass coating practice, postpone for above 2 hours to carry out X-03 protectant practice; 

1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.; 
2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 
3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film. 
Notice: Do not use excessive quantity leading to nonuniform practice. 

Note: 
1. Do not smear the whole vehicle by one time, to avoid difficulty of post-hardening treatment, please carry out practice part by part; 

2. While wiping dry, observe the surface in well lighted location, to avoid remaining residue, and if indoor illumination is inferior, drive the vehicle outdoor to conduct inspection and wiping in full range, to ensure perfect practice quality; 

3. After practice, complete hardening of the coating film requires around 1 week, thus do not engage water or rinse the vehicle before complete hardening;